WHEN IS A PERMIT REQUIRED?
The answer is ALMOST ALWAYS!
The North Carolina State Building Code states, "No person, firm or corporation shall erect, construct, enlarge, install, alter, repair, move, improve, remove, convert or demolish any building, structure, or service system without first obtaining a permit for such from the Inspections Department having jurisdiction."
In other words, a permit is required anytime work is done on a building or structure, or the systems serving the structure (including plumbing, mechanical and electrical wiring) with a few exceptions.
Examples of everyday projects requiring permits include:
- Converting a residence to a business.
- Constructing a deck, screened porch, or sunroom.
- Installing an irrigation system.
- Installing a swimming pool.
- Adding a ceiling fan.
- Finishing an attic or basement.
- Replacing a furnace or air conditioner.
- Replacing water heaters.
- Installing gas logs, attic fans, skylights
A permit is not required for:
- Replacement of non-structural, cosmetic building elements, such as: floor and wall coverings; moldings and trim; cabinets and casework; roof coverings with same materials, etc.
- Residential accessory buildings that are no more than 12 feet in any dimension.
- Replacement of electrical fixtures and components when work done within the wall or ceiling cavity or behind the finished wall or ceiling surface.
- Replacement of plumbing fixtures when the work goes beyond the trap seal.
- Installation of low voltage exterior landscape lighting
Questions? Call or visit the Central Permitting Office.
WHERE IS THE PERMIT OFFICE LOCATED?
|We are located at:||217 College Street, Suite A. |
Graham, NC 27253
View Map and Directions
WHAT ARE THE OFFICE HOURS?
The Central Permitting Office is open from 8:00 AM to 5:00 PM Monday through Friday. Field Inspectors work from 7:30 AM to 4:30 PM and are typically available in the office from 8:00 until 9:00 AM each morning.
WHAT STEPS ARE REQUIRED TO OBTAIN A BUILDING PERMIT?
The typical permitting process requires input from several County departments before a building permit can be issued. While not all applications follow the same path, generally the following steps can be expected.
For New Residential Permits:
The Alamance County Planning Department (570-4052), located in the same building as the Central Permitting Office, will identify the property to be improved and enter your parcel into our database. (If you are located within a municipality, go to your town's Planning Department first.)
If the property is not served by municipal utilities, the Environmental Health Department can determine if there is a suitable site for a well and septic system. You will need to submit a soil evaluation application to the Environmental Health Department and make arrangements for site visit. Once the soil evaluation is completed and approved, depending on your development situation, you will be instructed by the EHD to contact the County's GIS Mapping Specialist, Ricky Hall (570-4085) where you will be assigned an address for your parcel. Once an address is established, EHD will issue you an Authorization to Construct permit, allowing installation of a well and septic system.
Once all approvals are obtained from the departments listed above, submit a completed building permit application along with a least one set of plans to the Central Permitting Office.
Note: All contractor information is required to be on the application when submitted. Incomplete applications will not be accepted. All fees associated with the permit application are due at the time the permit is issued.
For New Commercial Permits:
Visit the Alamance County Planning Department (570-4052), located in the same building as the Central Permitting Office, where they will identify and enter your parcel into our database. (If you are located within a municipality, go to your town's Planning Department first.)
Contact the County's GIS Mapping Specialist, Ricky Hall (same location, 570-4085) where you will be assigned an address for your parcel.
If the building site is located in an area that is not served by a public utility, approval from the Environmental Health Department (336-570-6367) will be required. This may be in the form of an existing systems check or new soil evaluation. If the permit involves a restaurant, pool, or daycare, one set of plans will need to be submitted to Environmental Health for review. Before submitting applications and paying fees, it is recommended that applicants contact Betsy Meeks (ext. 325) about restaurants and Kenneth Greene (ext.318) about pools.
Apply for the Environmental Health Permits that are needed.
Submit a completed building permit application including; Appendix B from the Building Code, minimum facilities calculations per Table 403.1 of the North Carolina Plumbing Code, and three sets of completed sealed plans for review. Once the plan review is complete and the application approved, the Central Permitting Office will contact you to pick up your permit and pay all associated fees.
For Additions and Alterations:
Residential and commercial additions need to have the approval of the Environmental Health Department (336-570-6367) prior to obtaining your building permit, unless your addition is served by municipal utilities. Restaurant, Day Care, and Health Care Facility alterations will also need approval from the Health Department. Before submitting applications and paying fees for restaurant alterations, it is recommended that applicants contact Betsy Meeks (ext. 325).
Submit a completed building permit application including; Appendix B from the Building Code, minimum facilities calculations per Table 403.1 of the North Carolina Plumbing Code if applicable, and three sets of complete plans for review.
Once the plan review has been completed and the application approved, the Central Permitting Office will contact you to pick up your permit and pay all associated fees.
For Trade Permits:
Submit a completed permit application to the Central Permitting Office.
(Commercial applications require plans for review)
Pay all associated fees.
CAN I, AS HOMEOWNER, DO MY OWN WORK?
Yes, an owner of the property can do their own building, electrical, plumbing, and mechanical work. The owner does not need to be licensed in any of these areas; however state law requires that the property be the owner's primary residence for at least twelve months after completion of the work.
HOW MUCH WILL MY PERMIT COST?
Permit fees may be found on our fee schedule posted on our Fees page.
HOW CAN I GET A PERMIT APPLICATION?
All applications are available at the Central Permitting Office, or you may copy applications found on the Forms page of our website. Fill them out and submit them when you are ready to proceed.
HOW CAN I ACCESS THE NC BUILDING CODE?
Building codes can be obtained through the NC Department of Insurance at (919) 661-5880.
HOW CAN I SCHEDULE AN INSPECTION?
At this time, all inspections are scheduled through the Central Permitting Office, and inspections are conducted on a same day/next day basis until further notice.
|Location:||217 College Street, Suite A |
Graham NC, 27253
|Hours of Operation:||Monday - Friday |
8:00 AM - 5:00 PM (Except Holidays)
|Phone Numbers:||(336) 570-4057 |
|24 Hour Fax Machine:||(336) 570-6310|
HOW CAN I CONTACT MY INSPECTOR?
Field Inspectors work from 7:30 AM to 4:30 PM and are typically available in the office from 8:00 until 9:00 AM each morning.
WHERE CAN I GET A PERMIT BOOK?
The 2009 edition of the North Carolina State Building Code is available through the North Carolina Department of Insurance / Office of the State Fire Marshal. Currently "The Code" consists of 13 separate volumes that cover requirements for all building trades, accessibility, energy, fire, modular and manufactured homes, and existing buildings.